Well I am very lazy about making schematics and all that
boring paperwork stuff. So I am just gonna provide the reviews of various
schematics out available on the internet.
I just see the datasheet and do connection skipping the paperwork. I
have also noticed that though there are lots of schematics but no review post!!
Surprising. Well so here is one…
 |
| GLCD Schematic from All About Embedded System |
|
This one is taken from All about embedded system. This is
the most basic,compact and port efficient non spi connection one can make.
This is almost the one I have done except that I kept Vout, RST and Vo
open. It will work either way as I had
no need for those three pins. Data bus
goes to one port and control pins to other making it easier to work with
standard company libraries of the controller.(Here in this case ks0108).
|
 |
| GLCD Schematic from ScienceProject |
|
This one is a complete circuit diagram for an avr board
containing ISP, Serial Port,3 adc pin out and glcd connection. This is
actually a proper most perfect schematic I have seen. Here Databus of glcd is
connected at Port C, CS1, CS2, EN, RW and D/I are connected to PA4, PA3, PA2,
PA1 and PA0. Here the rest of Port A pins PA5,PA6 and PA7 are outputted to be
used as ADC. This is a nice but a more efficient one has been made by guys at
extremeelectronics. The one at extremeelectronics is basically a GLCD centric Development Board.
|
 |
| The GLCD Based Development Board from extremeelectronics |
| asd
|
|
if in your application gui plays a major role than this is the board that one should prefer cause it is glcd centric has all essential keys and easy to program using progfx library created by exteremeelectronics.
